Major OnePlus 10 Pro Specifications Have Just Surfaced

OnePlus 10 Pro CAD renders image 5

The OnePlus 10 Pro surfaced in CAD-based renders quite recently, and the phone’s specifications have just appeared as well. This information comes from @OnLeaks and 91mobiles, who have partnered up yet again.

The OnePlus 10 Pro specifications have surfaced

According to the source, the OnePlus 10 Pro will be fueled by the Snapdragon 8 Gen1 SoC. That is the new rumored name for the Snapdragon 898. Qualcomm did confirm that it’s changing its naming scheme for Snapdragon chips.

The phone is said to feature a 6.7-inch QHD+ display with a 120Hz refresh rate. That display will be curved, and we’re looking at an LTPO display here. A display camera hole will be placed in the top-left corner of the phone’s display.


The device will come in two RAM and storage variants, based on this information. You’ll be able to choose between 8GB and 12GB of LPDDR5 RAM. Those two models will include 128GB and 256GB of UFS 3.1 flash storage, respectively.

The OnePlus 10 Pro will be IP68 rated for water and dust resistance. The phone will include a 5,000mAh battery, though the charging speed hasn’t been mentioned. 125W wired charging has been rumored for the device, while 50W wireless charging will likely be supported.

The phone is said to include four cameras with Hasselblad branding

Now, in regards to the cameras. On the back, you can expect three cameras, 48, 50, and 8-megapixel units. The 48-megapixel one will allegedly be the main camera, while the 50-megapixel sensor will be an ultrawide unit. An 8-megapixel sensor is reserved for a telephoto camera. Hasselblad branding will be included.


On the front, you’ll get a 32-megapixel camera. Android 12 will come pre-installed on the device, along with the OnePlus’ custom UI. That’s pretty much all the spec info that the source shared.

The OnePlus 10 Pro, and likely its OnePlus 10 sibling, will first launch in China (in January or February), based on a recent report. The devices are expected to make a global debut in either March or April, we’ll see.