X

Galaxy Tab A8 Press Render Appears To Confirm Previous Leaks

Galaxy Tab A8 2021 press render leak
Advertisement
Advertisement

Seemingly official Samsung Galaxy Tab A8 press render just appeared to confirm previous leaks. This render comes from Evan Blass, one of the best known tipsters around.

The Galaxy Tab A8 (2021) press render basically confirms previous leaks

As you can see in the image above, only the front side of the device is shown here. It’s shown in both portrait and landscape mode, and it goes hand-in-hand with CAD-based renders that surfaced a while back.

The power / lock, volume up, and volume down buttons will all be located on the right-hand side of the device. This tablet will also have more than enough bezels for you to grip it.

Advertisement

CAD-based renders also showed us the back side of the device, which contains a single camera. The sides of this device will be more or less entirely flat, by the way.

The Galaxy Tab A8 (2021) is expected to launch soon. The device will almost certainly arrive before the end of the year, by the way. Its specifications did surface quite recently as well.

It will feature a 10.5-inch display, and quad speakers

The Galaxy Tab A8 (2021) will feature a 10.5-inch display. It will be a fullHD+ LCD display, with a 60Hz refresh rate. Quad speakers will be included in the package, along with Dolby Atmos support.

Advertisement

The Unisoc Tiger T618 chipset will fuel the device, allegedly. That is a 12nm processor, with eight cores. Samsung will release a WiFi only version of the tablet, but one with LTE connectivity will also be available.

A 7,040mAh battery was also mentioned in rumors, along with fast charging. Chances are we’ll get 15W wired charging with the device, but Samsung may surprise us.

A 3.5mm headphone jack will also be included in the package, in case you were wondering. Now, in regards to its cameras. A single 8-megapixel unit will sit on the back, while a 5-megapixel camera will be included on the front.

Advertisement

A side-facing fingerprint scanner will also be included here. The device is expected to measure 246.7 x 161.8 x 6.9mm (8.7mm with a camera bump).