We have seen quite a few OnePlus 7 Pro renders thus far, but Ishan Agarwal just went a step further. A well-known tipster has published a collection of OnePlus 7 Pro renders which show the device from pretty much every angle, revealing all design-related details.
All those images are included in the gallery down below, and you will that both Nebula Blue and Almond color options are shown here. These images pretty much confirm that a 3.5mm headphone jack will not be included here, even though that was to be expected.
As most of you know by now, the OnePlus 7 Pro will be made out of metal and glass, while it will sport three cameras on the back. Those three cameras will be vertically-aligned, and right below them, you will notice a dual-tone flash. OnePlus’ logo will be located in the middle of the phone’s back side, while the company’s name will sit on the bottom of the phone’s back.
The device will be curved both on the back and on the front, and will become the first OnePlus-branded phone to ship with a curved display. Bezels will be pretty much non-existent on this phone, its “chin” will be a hair thicker than the rest of its bezels, and the device will not include a display notch or a hole.
OnePlus actually opted to include a pop-up camera on this phone, it seems, and that pop-up camera will pop up from the left portion of the phone’s top side. The power / lock key will be included on the right side of the OnePlus 7 Pro, while an alert slider will sit right above it. The volume up and down buttons will sit on the left side of this phone.
These renders also reveal how much will the phone’s cameras protrude on the back, and you can also see the phone’s pop-up camera from the bird’s perspective. A noise-canceling microphone will also be located at the top of this phone.
Two microphones will be located on the bottom of the phone, and in-between them, you will notice a Type-C USB port. The speaker grille sits on the bottom of the device, and the same can be said for the phone’s SIM card tray.
The OnePlus 7 Pro will become official on May 14, along with the OnePlus 7, and quite possibly the OnePlus 7 Pro 5G. The OnePlus 7 Pro 5G will be identical to the OnePlus 7 Pro, aside from the fact it will support 5G connectivity.
The OnePlus 7 will differ from the Pro model quite a bit, though. That device will look almost the same as the OnePlus 6T, at least according to leaks, and it will be a bit smaller than the OnePlus 7 Pro. The device will include a teardrop display notch, and one less camera on the back.
Both of these devices will ship with Android 9 Pie, and UFS 3.0 flash storage. The OnePlus 7 will sport a 6.41-inch fullHD+ flat display, while the Pro model is rumored to include a 6.67-inch QHD+ Fluid AMOLED curved panel. Both phones will sport a 48-megapixel main camera on their backs, while the Pro variant will include faster charging, 20W vs 30W charging.