The Cubot P20 is on the way, and it will sport a display notch, like many other Chinese smartphones out there. Cubot has just basically announced the device, as the company shared a couple of press renders with us, along with the phone's partial spec sheet, and the very first promo video. As far as the design is concerned, the Cubot P20 will be made out of metal and glass, while it will sport a rear-facing fingerprint scanner, and a vertically-aligned dual camera setup next to that fingerprint scanner. The phone's bezels will be quite thin, and its display will sport rounded corners.
As you can see in the provided images, all the physical keys will be included on the right-hand side of the Cubot P20, while the phone's notch will not be as wide as it is on some other phones. Cubot's branding will be included on the back of the phone, while an LED flash will be placed in-between the phone's rear-facing cameras. The device will sport a 6.18-inch fullHD+ (2246 x 1080) display with a 19:9 display aspect ratio. MediaTek's MT6750T 64-bit octa-core processor will fuel this phone, and it will be clocked at 1.5GHz. The Cubot P20 will include 4GB of RAM and 64GB of expandable storage, while Android 8.0 Oreo will come pre-installed on the device. A 4,000mAh battery will ship with this phone as well, while the device will be 8.5mm thick.
On the back of the phone, you will be able to find 20 and 2-megapixel cameras, while a single 13-megapixel camera will be included on the front side of the Cubot P20. The company also mentioned that the device will ship with 'Smart Beauty' mode, which the device's front-facing camera will utilize. Cubot was inspired by the iPhone X when it made this smartphone, and the device will probably become available in August. The Cubot P20 will be priced at $129.99 once the company decides to release it, and if you'd like to take a closer look at the Cubot P20, check out the gallery down below, and also the embedded video.